![]() |
|
The SS100 is a single-port secure device server that connects RS-232/422/485 serial devices to the industry standard 10/100Base-T Ethernet network.
The SS100 device servers incorporate advanced features such as such as flexible operation mode, TCP/UDP multicasting, telnet COM port control protocol support (RFC2217 compliant), SSL encryption, and port event handling.
|
| SS100 | |
| CPU | MPC 855T 32-bit RISC CPU, 50Mhz |
| DRAM | 32 MB |
| Flash | 8 MB ( 1 MB of user programmable space ) |
| Serial Interface | 1 port DB9 connector |
| Serial speeds 75bps to 230Kbps | |
| Hardware RTS/CTS, Software Xon/Xoff | |
Signals:
|
|
| Modem controls: DTR/DSR, DCD and RTS/CTS | |
| Network Interface | 10/100Base Ethernet with RJ45 Ethernet connector |
| Supports static and dynamic IP address | |
| Network Protocols | ARP, IP/ICMP, DNS, Dynamic DNS SMTP with/without Authentication, pop-before SMTP, DHCP client, NTP, PPPoE TCP, UDP, SSL v2 & v3, TLS v1, RFC-2217 SSH v1 & v2,Telnet HTTP, HTTPS, SNMP v1 & v2 |
| Serial Port Access protocol : Telnet, TCP, UDP, SSL v2 & v3, TLS v1, RFC-2217 |
|
| Embedded Linux |
File System :
|
| Security | User ID & Password |
| HTTPS | |
| Secure terminal interface: SSH | |
| Data Encryption: SSLv2/v3, TLS v1, 3DES and RC4 | |
| IP address filtering | |
| SCP | |
| Modem emulation |
Full support for AT commands |
| Management |
|
System log and statistics:
|
|
Firmware:
|
|
| Diagnostic LED |
|
| Power | 5VDC, 0.5A @ 5VDC |
| Environmental | Operating temperature: 0'C to 50'C |
| Storage temperature: -20'C to 66'C | |
| Humidity: 90% Non-condensing | |
| Physical Properties |
100 x 72 x 25 (mm)3.94 x 2.83 x 0.98 (in.) |
| DIN-rail mount option | |
| 149.99 Years | |
| MTBF | 149.99 Years |
| Approvals | FCC Part 15 Subpart B, Class A EN61000-3-2, EN61000-3-3 EN60950-1 EN55022 EN55024 MIC |
| Warranty | 5-year Limited Warranty |